Home How To Build Rectangular Decks
How to Build a Rectangular Deck
How to Build a Rectangular Deck - Step 4
Page 4 of 8

Step 4: Square the Frame

How to Build a Rectangular Deck - Step 4

Place a 2"x6" support board on top of each row of Dek-Block® piers. Attach the 2"x6" end boards to support boards using two 2 1/2" deck screws at each connection. Using a level as a guide, ensure that both end boards and both support boards are level. /p>

NOTE: The end boards will extend past the support boards up to the house. Leave a 1/8" to 1/2" gap between the end board and the house. This is not shown on our standard plans.

Next, measure the diagonal distance from opposite corners. Adjust the outside support boards and Dek-Block® piers until the diagonal distance between opposite corners is EQUAL.

After the deck is square and level in all four directions, attach the 2"x6" support boards to the 4"x4" posts using two 2 1/2" deck screws. At an angle from each side (toe-screw).

Toe-Screwing Supports

How to Build a Rectangular Deck - Toe-Screwing Supports


 
Banner

Printable Step by Step Rectangular Instructions


The printable version of our instructions are in Adobe PDF format. You must have Adobe Reader to be able to view and print the plans. The Acrobat Reader is free from Adobe.

Banner

CustomDeckPlans.com

Custom Deck Plans

If you don’t feel comfortable modifying a plan or you have something that is too complex to even imagine, try www.CustomDeckPlans.com
CustomDeckPlans.com is a full service planning and design firm specializing in DekBrands Floating Foundation Deck System.

Plan Types for Purchase