|
Featured in the Handyman Club of America Magazine
|
Featured in the Handyman Club of America Magazine - Page 8 |
|
Page 9 of 9
Step 28 - Planter Frame
Cut all 2"x2" cedar boards to length according to dimensions supplied in the plan. Attach following the layout provided in the plan using one 2 1/2" deck screw at each connection. |
Step 29 - Planter Base
Cut three 15 3/4" cedar 2"x4" boards. Attach to base using two 2 1/2" deck screws at each end. |
Step 30 - Planter Sides
Cut twelve 24" cedar 5/4"x6" boards. Starting flush with the edge of the frame, attach using 2 1/2" deck screws at each end. Evenly space the remaining two 5/4"x6" cedar boards along that side such that the last board extends past the frame the thickness of a 5/4"x6" cedar board. Repeat this for each side. |
Step 31 - Side Trim
Place and attach 2"x4" cedar boards at the bottom and top of the planter using 2 1/2" trim head screws. These pieces will need to be cut-to-fit. |
Step 32 - Top Trim
Place and attach 5/4"x6" cedar boards on the top of the planter using 2 1/2" trim head screws. These pieces will need to be cut-to-fit. |
|
|
|
|
Printable Step by Step Instructions and Plans for the octagonal deck featured in the Handyman Club of America Magazine
The printable version of our instructions are in Adobe PDF format. You must have Adobe Reader to be able to view and print the plans. The Acrobat Reader is free from Adobe.
|
Showcase 
